How to Remove Peel and Stick Tile Backsplash and Do Peel And Stick Tile Damage Walls?

How to remove peel and stick tiles and do peel and stick tiles damage the wall? This is an issue that many users are very concerned about. Peel and Stick backsplash or tile is the newest and most affordable way to update and decorate an entire home to give it a new, fresh look. It's also easy for homeowners looking for an affordable way to update their homes with minimal effort and expense. 

3D Orange Rust and Tan Brick Peel and Stick Wall Tile

If you're considering using peel and stick backsplash in your home, you may be wondering if they damage walls. After all, these tiles are known for being easy to install - but can they also be easily removed without damaging the wall? What if I told you that, contrary to popular belief, peel and stick tiles do not damage walls? They can be easily removed without causing any harm. 

However, If you try to remove self adhesive wall tiles by pulling on them or prying them off the wall with a knife or other sharp object, you risk pulling off part of the wall's surface. This will leave behind a sticky residue on your walls that is difficult to remove and leaves them looking unsightly. This is why it is essential to learn how to remove peel and stick tiles backsplash without causing any damage to your home!

fish scale backsplash

Fish Scale Tile Backsplash Peel and Stick for Kitchen Backsplash 

Today, we will install and remove stick tiles from your walls. We will also discuss how you can avoid damaging your walls in the process and any other precautions you should take when removing them from your walls. So, let's get started!

Do Peel And Stick Tiles Damage Walls When Remove Them?

There is a lot of debate on whether or not peel and stick tiles damage walls. Some people say that the adhesive on the back of the tiles can cause damage to the wall, while others claim that there is no risk at all. So, what's the truth?

Peel And Stick Tiles Damage Walls

Well, it depends on how careful you are when installing the tiles. If you take your time and are careful when applying the adhesive, there is no risk of damage. However, if you're in a hurry and slap the tiles onto the wall without being careful, then there is a chance that they could damage the surface. Moreover, if you use the correct way to remove stick on backsplash tiles, there is also no risk of damage.

Green Spanish Peel and Stick Backsplash Tile

Spanish Peel and Stick Tile for Bathroom Backsplash

In general, though, peel and stick vinyl tiles are a great way to add some personality to your home without causing any damage. You can easily take them off and replace them with a new look, so they are perfect for people who want to try out a new style without committing. So, do peel and stick tiles damage walls? Well, it depends on you. If you take your time to do it right, then no. If you don't care and rush, then yes.

However, if you have already installed peel and stick tiles onto your walls, do not worry. There is a safe way to remove peel and stick tiles from the surface without causing any damage. It's pretty simple. So, if you have already installed the tiles, then read on to find out how to remove peel and stick tiles without damaging your walls.

Many products on the market are made with inferior adhesives that can damage walls. Our(Commomy Decor) products are different because they use the superior adhesive that will not harm your walls. This makes our product perfect for anyone who wants to install peel and stick tiles without worrying about causing any damage. 


3D peel and stick Tiles, Include Faux Brick Tiles, Faux Stone Tiles, Faux Wood Tiles and Other Design Styles

Our products have unique "surface friendly technology," which means it won't hurt your wall when removing peel and stick tile or peel and stick backsplash. It's also an upgraded version of glue that doesn't require any liquid or water for installation, making it easy on DIYers who don't want to spend hours just setting up their backsplash or kitchen tile! In short, our product is much more environmentally friendly and will not damage your walls in any way! Try it out for yourself and see the difference.


Premium Peel and Stick Backsplash Tiles, Include Subway Tiles, Herringbone Backsplash, Hexogan Backsplash, Mosaic Tiles and Other Design Styles

How to Remove Peel and Stick Tiles?

If you already have peel and stick tiles on your wall, it is effortless to remove without causing any damage. All you need is a little time and some patience, along with the right materials. Plus, we're going to walk you through the process step by step!

You Will Need:

Below are the tools and materials you need to remove peel and stick backsplash. Having these items on hand will make it much easier to remove the tiles, so make sure you don't forget anything.

Pry Bar: Use a pry bar to remove the individual tiles from the wall. 

Marker pen: If you plan to reuse your peel and stick tiles, use a marker pen to label them so you can know which piece belongs where.

Utility knife: A utility knife will help you cut through the caulk and score the tiles to make their removal easier. Make sure the one you use is as sharp as possible so you can make your cuts all the way through.

Putty knife: To scrape the tiles off the adhesive, attaching them to the wall.

Heat gun: A heat gun will help you soften the adhesive so you can scrape it easily from the wall. However, if you don't have access, you can use a hair drier.

Bucket: Use your usual cleaning bucket.

Natural Sponge or Cloth: You can use any of these to spread the soapy solution over the adhesive.

Protective gloves: Wear high-quality leather work gloves.

3D Emulational Faux Wood Backsplash for Kitchen Wall Decor

3D Emulational Faux Wood Backsplash for Kitchen Wall Decor

Step-By-Step Guide To Remove Peel And Stick Tiles:

Follow these steps to remove the peel and stick tiles without damaging your walls.

Step 1: Warm The First Tile:

The adhesive that holds the tiles to your wall is very strong glue. The longer it stays on the wall, the harder it will be for you to break down. So, to make its removal easier, use a heat gun or hair drier to loosen up the adhesive. 

The safest way to heat self-adhesive vinyl tiles is by using a hairdryer. You can use other heat sources such as a heat gun or an iron box, but you must be careful as these can easily burn the tiles or create a fire hazard. Put your hairdryer on the highest setting and hold it an inch away from the tile. Move the hairdryer around for about 60 seconds to heat the tile adequately.

The closer you hold the dryer to the tile, the faster it will warm up. However, if you hold the dryer too close, it may overheat it as the hot air circles back into the motor. Try positioning the dryer at least one inch away from the tile to diffuse the heat. 

Heat gun or Hair Drier

Heat gun or Hair Drier

Step 2: Lift The Tile:

Now that you have applied some heat, the tile should be easier to remove. Start at the corner of the heated tile and use a putty knife to lift the edge. Push the putty knife into the crack between the tile and wall until you have enough space to insert a pry bar. Before you start prying off the tile, be careful not to break it. Remember, your goal is to remove peel and stick tile as a whole piece.

It's important to use moderate strength as you pry up the tile. Instead of lifting it straight, pry it at a 30-degree angle until you are satisfied that the tile has lifted enough for you to slip your hands underneath the tile. This will help prevent damage to the wall. To remove peel and stick tiles, you'll need to get underneath them and pry them off the wall. Be careful not to break the tile in the process. 

lift the backsplash tiles


Lift The Backsplash Tile

Step 3: Pull The Tile

Now that you have a good grip on the tile pull it straight off the wall. If it doesn't come off easily, use your pry bar to help you get a better hold on it. Be careful not to break the tile in the process.

If the adhesive is particularly stubborn, you can make cuts in it with a scoring tool before pulling it off. This will make the process much easier and prevent any damage to the wall.

When removing stick-on tile, it's best to pull the tile toward your body. This will help ensure that the tile doesn't break. You can do this by applying tension and agitating the adhesive until the tile comes loose.

Step 4: Repeat To Remove The Other Tiles

If you want to remove all the tiles, you will have to repeat this process for each tile. Make sure that you heat each tile before you start prying it off the wall. This will make the process much easier and prevent any damage to the wall.

In our experience, how well you remove the first tile will have a bearing on the adjacent tiles. Try to make the removal process as clean as possible to pave the way for the rest of the tiles.

When removing a tile for replacement, you want not to damage the adjacent tiles. Try to remove peel and stick tile you want to replace without breaking it.

Step 5: Clean the Wall:

Once you have removed all the tiles, it's time to clean the wall. Use a damp cloth to remove any adhesive or residue that may be left behind. Be sure to clean the entire area so that there is no trace of the adhesive. If you don't clean the wall, the adhesive will dry and become difficult to remove. Make sure to dry the wall completely before painting or papering over it.

One way to clean the wall is by using a soapy solution. You can make the solution by mixing two tablespoons of dish soap with one quart of warm water. Soak a natural sponge in the solution and scrub the wall until the adhesive is removed. Be sure to rinse the sponge frequently and change the water as needed.

When cleaning a wall, it's important to use a gentle touch. Scrubbing too hard can damage the paint or wallpaper on the wall.


Black Subway Backsplash Peel and Stick Tile for Fireplace Surround

Additional Tips For Removing Peel and Stick Tiles:

When you remove peel and stick tiles yourself, make sure to dress for safety. Wear a respirator mask to avoid inhaling any fumes, leather gloves to protect your hands, and safety goggles to keep your eyes safe.

Make sure you work in a well-ventilated area. Keep your doors and windows open throughout the wall removal process to allow fresh air in and contaminated air out. It will also help get rid of the adhesive or asbestos fumes quickly.

After you remove peel and stick vinyl backsplash or stick tiles, make sure to clean your putty knife and utility knife thoroughly with soap. It's best to have separate knives for different tasks to avoid cross-contamination.

Green Mosaic

3D Green Mosaic Backsplash for Kitchen Wall Decor

To obliterate the adhesive, start with a mild solution such as a soap-based cleaner or a household degreaser to remove the adhesive. If this doesn't work, you can try something stronger such as a solvent containing denatured alcohol or mineral spirit. For very stubborn glue, try a citrus stripper or an acetone solvent.

If you need help removing or replacing these types of tiles, contact a specialized service near you. They will have the necessary experience and tools for this type of work and can get the job done quickly.

faux brick backsplash

3D Emulational Faux Brick Backsplash for Interior Wall Decor

How do you Remove the Peel and Stick Tile Glue from Concrete?

Remove the peel and stick adhesive from concrete by scrubbing it vigorously with a caulking remover. Cover the surface liberally with the solution, then wring out a cloth in mineral spirits and use it to wipe up any residue from the track of your fingers.

Step 1: Remove excess glue

Before you try removing the peel and stick tile adhesive from concrete, remove any leftover adhesive or debris. Use a putty knife to scrape off as much of the adhesive as possible, being careful not to scratch or damage your wall in this process. You may also want to sand away any "stuck" bits that remain before proceeding with these steps. Be sure to clean your putty knife should you choose this route; steel is often used in knives that can damage your wall if you aren't careful.

Step 2: Apply solvent

Once you have removed all of the adhesives, it's time to remove the leftover residue. Apply a thick coating of mineral oil over the adhesive spot using a rag or paper towel. Wait 10-15 minutes to soak in before removing the glue.

Step 3: Remove the residue

Grab an old rag or paper towel, moisten it with mineral spirits, and use it to wipe away the adhesive. Wipe in one direction only to prevent smudging or smearing. When brushing over the patch, you may want to use a sealable plastic bag around your hand to protect the surrounding wall from getting sticky.

The adhesive should be entirely removed before replacing your peel and stick tile. Be sure to read product labels carefully to verify that the remover you're using is appropriate for your particular wall type, especially if it's a surface such as wood or vinyl.

3D_Brown_and_White_Stone_Peel_and_Stick_Wall_Tile_kitchen island

3D Stone Peel and Stick Tile for Kitchen Island

The Takeaway:

At Commomy, we have a wide selection of tiles to choose from, and we can help you find the perfect ones for your project. And, best of all, we offer competitive prices and excellent customer service. We are a brand that pays attention to user experience, and our goal is to provide users with high-quality products to meet their needs for home decoration. We believe that a good user experience starts with understanding our users' needs and designing products with them in mind. We hope to continue providing our users with the best possible products and services.

3d peel and stick wall tiles

3D peel and stick Wall Tiles, Include Brick, Stone, Wood and Other Design Styles

Here is the article about " What Surface Can You Put Peel and Stick Tile On?", and there are more home wall decor ideas from our Pinterest and Instagram channel. If you have any questions about our products or services, please don't hesitate to contact us.